Natamycin
This article is missing information about biosynthesis pathway.(January 2022) |
Clinical data | |
---|---|
Trade names | Natacyn, others |
AHFS/Drugs.com | Monograph |
Routes of administration | Eye drops[1] |
ATC code | |
Identifiers | |
| |
CAS Number | |
PubChem CID | |
DrugBank | |
ChemSpider | |
UNII | |
KEGG | |
ChEMBL | |
E number | E235 (preservatives) |
CompTox Dashboard (EPA) | |
ECHA InfoCard | 100.028.803 |
Chemical and physical data | |
Formula | C33H47NO13 |
Molar mass | 665.733 g·mol−1 |
3D model (JSmol) | |
Density | 1.35 g/ml g/cm3 |
Melting point | Darkens at ±200 °C with vigorous decomposition at 280-300 °C |
Solubility in water | 0.39 mg/ml |
| |
|
Natamycin, also known as pimaricin, is an antifungal medication used to treat fungal infections around the eye.[1][2] This includes infections of the eyelids, conjunctiva, and cornea.[1] It is used as eyedrops.[1] Natamycin is also used in the food industry as a preservative.[2]
Allergic reactions may occur.[1] It is unclear if medical use during pregnancy or breastfeeding is safe.[1] It is in the macrolide and polyene families of medications.[1] It results in fungal death by altering the cell membrane.[1]
Natamycin was discovered in 1955 and approved for medical use in the United States in 1978.[1][2] It is on the World Health Organization's List of Essential Medicines.[3] It is produced by fermentation of certain types of the bacterium Streptomyces.[1][4]
Uses
[edit]Medical
[edit]Natamycin is used to treat fungal infections, including Candida, Aspergillus, Cephalosporium, Fusarium, and Penicillium. It is applied topically as a cream, in eye drops, or (for oral infections) in a lozenge. Natamycin shows negligible absorption into the body when administered in these ways. When taken orally, little or none is absorbed from the gastrointestinal tract, making it inappropriate for systemic infections.[5] Natamycin lozenges are used by veterinarians for oral thrush.[6]
Food
[edit]Natamycin has been used for decades in the food industry as a hurdle to fungal outgrowth in dairy products and other foods. Potential advantages for the usage of natamycin might include the replacement of traditional chemical preservatives, a neutral flavor impact, and less dependence on pH for efficacy, as is common with chemical preservatives. It can be applied in a variety of ways: as an aqueous suspension (such as mixed into a brine) sprayed on the product or into which the product is dipped, or in powdered form (along with an anticaking agent such as cellulose) sprinkled on or mixed into the product.[citation needed]
While not currently approved for use on meats in the United States, some countries allow natamycin to be applied to the surface of dry and fermented sausages to prevent mold growth on the casing. Also, natamycin is approved for various dairy applications in the United States. More specifically, natamycin is commonly used in products such as cream cheeses, cottage cheese, sour cream, yogurt, shredded cheeses, cheese slices, and packaged salad mixes. One of the reasons for food producers to use natamycin is to replace the artificial preservative sorbic acid.[7] Natamycin is also known to diffuse slower and lesser into cheese when compared to sorbate, which could otherwise cause undesirable changes to the flavor.[8]
As a food additive, it has E number E235. Throughout the European Union, it is approved only as a surface preservative for certain cheese and dried sausage products. It must not be detectable 5 mm below the rind. While natamycin is approved in different applications at different levels in the world, it is approved in over 150 countries worldwide.[9]
The European Food Safety Authority (EFSA) panel took over the responsibilities of providing scientific food safety advice to the EU from the Scientific Committee on Food in 2002.[10] In 2009, the EFSA considered the proposed use levels of natamycin are safe if it is used for the surface treatment for these cheese and sausage types.[11]
Safety
[edit]Natamycin does not have acute toxicity. In animal studies, the lowest LD50 found was 2.5-4.5 g/kg.[12] In rats, the LD50 is ≥2300 mg/kg, and doses of 500 mg/kg/day over two years caused no detectable differences in survival rate, growth, or incidence of tumors. The metabolites of natamycin also lack toxicity. The breakdown products of natamycin under various storage conditions may have a lower LD50 than natamycin, but in all cases, the numbers are quite high. In humans, a dose of 500 mg/kg/day repeated over multiple days caused nausea, vomiting, and diarrhea.[13]
No evidence shows natamycin, at either pharmacological levels or levels encountered as a food additive, can harm normal intestinal flora, but definitive research may not be available.[13] However, some people are allergic to natamycin.[14]
The EFSA has concluded that the use of natamycin as a food additive has no relevant risk for the development of resistant fungi.[11]
Mechanism of action
[edit]Natamycin inhibits the growth of fungi by specifically binding to ergosterol present in fungal cell membranes. Natamycin inhibits amino acid and glucose transport proteins leading to a loss of nutrient transport across the plasma membrane. While this binding is reversible, ergosterol binding acts as a universal mechanism of fungal inhibition, allowing natamycin to act on diverse fungal pathogens from Saccharomyces yeast to Aspergillus moulds. Natamycin is unique amongst related antifungals specifically because it does not directly cause membrane permeabilization.[15][16][17] Structurally-related antibiotics with similar binding properties are thought to produce hydrophilic channels that allow leakage of potassium and sodium ions from the cell.[18]
Natamycin has very low solubility in water; however, natamycin is effective at very low levels. Its minimum inhibitory concentration is less than 10 ppm for most molds.[citation needed]
Biochemistry
[edit]Natamycin is produced as a secondary metabolite by some Streptomyces species: S. natalensis, S. lydicus, S. chattanoogensis and S. gilvosporeus.[4] Structurally, its core is a macrolide containing a polyene segment, with carboxylic acid and mycosamine groups attached. As with other polyene antimycotics, the biosynthesis begins with a series of polyketide synthase modules, followed by additional enzymatic processes for oxidation and attachment of the substituents.[19]
Natamycin is produced on an industrial scale by fermentation of various Streptomyces strains, including S. chattanoogensis L10.[19]
History
[edit]Natamycin was first isolated in 1955 from fermentation broth of a Streptomyces natalensis cell culture.[20] It was originally named pimaricin to honor Pietermaritzburg, where Streptomyces natalensis was acquired. Pimaricin was later renamed after the World Health Organization (WHO) mandated that antibiotics produced by Streptomyces end in –mycin. The name natamycin was chosen in reference to the natalensis species name.[20]
Society and culture
[edit]Natamycin appears on Whole Foods' "Unacceptable Ingredients for Food" list.[21]
References
[edit]- ^ a b c d e f g h i j "Natamycin". The American Society of Health-System Pharmacists. Retrieved 8 December 2017.
- ^ a b c Davidson PM, Juneja VK, Branen J (2001). "Antimicrobial Agents". In Branen AL, Davidson PM, Salminen S, Thorngate J (eds.). Food Additives. CRC Press. pp. 599–600. ISBN 9780824741709.
- ^ World Health Organization (2019). World Health Organization model list of essential medicines: 21st list 2019. Geneva: World Health Organization. hdl:10665/325771. WHO/MVP/EMP/IAU/2019.06. License: CC BY-NC-SA 3.0 IGO.
- ^ a b Aparicio JF, Barreales EG, Payero TD, Vicente CM, de Pedro A, Santos-Aberturas J (January 2016). "Biotechnological production and application of the antibiotic pimaricin: biosynthesis and its regulation". Applied Microbiology and Biotechnology. 100 (1): 61–78. doi:10.1007/s00253-015-7077-0. PMC 4700089. PMID 26512010.
- ^ Brayfield A (2014). Martindale: The Complete Drug Reference (38th ed.). London: Pharmaceutical press. ISBN 978-0-85711-139-5.
- ^ "Topical Antifungal Drugs: Natamycin". Virginia-Maryland Regional College of Veterinary Medicine. Archived from the original on 7 April 2017.)
- ^ "Kraft Singles Ditch Artificial Preservatives". NBC News. 11 February 2014. Archived from the original on 8 October 2022.
- ^ Youssef AM, Assem FM, El-Sayed SM, Salama H, Abd El-Salam MH (2017). "Utilization of Edible Films and Coatings as Packaging Materials for Preservation of Cheeses". Journal of Packaging Technology and Research. 1 (2): 87–99. doi:10.1007/s41783-017-0012-3. S2CID 257086547.
- ^ "Regulatory and Approval Information". Natamycin.com.
- ^ "Safety and regulation: the formal process for analyzing the test data on food additives". understandingfoodadditives.org. Archived from the original on 7 January 2014.
- ^ a b EFSA Panel on Food Additives and Nutrient Sources added to Food (ANS) (December 2009). "Scientific Opinion on the use of natamycin (E 235) as a food additive". EFSA Journal. 7 (12): 1412. doi:10.2903/j.efsa.2009.1412.
- ^ Oostendorp JG (1981). "Natamysin(R)". Antonie van Leeuwenhoek. 47 (2): 170–171. doi:10.1007/bf02342201. S2CID 264007289.
- ^ a b Mattia A, Dr Cerniglia C, Baines J. Safety evaluation of certain food additives and contaminants: natamicin (pimaricin). WHO Food Additives Series #48 (Report). International Programme on Chemical Safety (IPCS).
- ^ "Natamycin". RxList.
- ^ te Welscher YM, ten Napel HH, Balagué MM, Souza CM, Riezman H, de Kruijff B, et al. (March 2008). "Natamycin blocks fungal growth by binding specifically to ergosterol without permeabilizing the membrane". The Journal of Biological Chemistry. 283 (10): 6393–6401. doi:10.1074/jbc.M707821200. PMID 18165687.
- ^ Van Leeuwen MR, Golovina EA, Dijksterhuis J (June 2009). "The polyene antimycotics nystatin and filipin disrupt the plasma membrane, whereas natamycin inhibits endocytosis in germinating conidia of Penicillium discolor". Journal of Applied Microbiology. 106 (6): 1908–1918. doi:10.1111/j.1365-2672.2009.04165.x. PMID 19228256. S2CID 2873514.
- ^ te Welscher YM, van Leeuwen MR, de Kruijff B, Dijksterhuis J, Breukink E (July 2012). "Polyene antibiotic that inhibits membrane transport proteins". Proceedings of the National Academy of Sciences of the United States of America. 109 (28): 11156–11159. Bibcode:2012PNAS..10911156T. doi:10.1073/pnas.1203375109. PMC 3396478. PMID 22733749.
- ^ Nedal A, Sletta H, Brautaset T, Borgos SE, Sekurova ON, Ellingsen TE, et al. (November 2007). "Analysis of the mycosamine biosynthesis and attachment genes in the nystatin biosynthetic gene cluster of Streptomyces noursei ATCC 11455". Applied and Environmental Microbiology. 73 (22): 7400–7407. Bibcode:2007ApEnM..73.7400N. doi:10.1128/AEM.01122-07. PMC 2168226. PMID 17905880.
- ^ a b Liu SP, Yuan PH, Wang YY, Liu XF, Zhou ZX, Bu QT, et al. (April 2015). "Generation of the natamycin analogs by gene engineering of natamycin biosynthetic genes in Streptomyces chattanoogensis L10". Microbiological Research. 173: 25–33. doi:10.1016/j.micres.2015.01.013. PMID 25801968.
- ^ a b "The origins of natamycin". Archived from the original on 16 July 2014.
Natamycin was isolated for the first time in 1955 in the Gist-brocades research laboratories, from the fermentation broth of a culture of Streptomyces natalensis.
- ^ "Unacceptable Ingredients for Food". Whole Foods Market IP. L.P. Archived from the original on 2 January 2018.